Gemini™ 16mm d6 Blue-Gold w/white Dice Block™ (12 dice)
Gold Series Metal Dice
Tärningspåse i svart sammet med 7 fickor på insidan, fodrad i lila sammet. Det finns en broderad trolldrycksflaska på framsidan och dekorativa dödskallar i metall i slutet av dragsnörena.
Mått: 17 x 11 cm (när påsen är stängd är den ca 31 cm bred).
Tärningsförvaringsetui i svart konstläder med guldtryck och dragkedja. Inuti den lilla väskan finns plats för 35 olika typer av tärningar eller andra speltillbehör i olika former.
Etuiet är ca 18 cm brett och 24 cm högt.
Genomskinliga tärningar med slöjor i vitt och guld och med guldfärgade siffror.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Tärningar i röda och orangea toner med guldstänk och guldfärgade siffror.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Tärningar i svart och guld och med guldfärgade siffror.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Lätt genomskinliga tärningar i lila toner och guldskimmer, med siffror i guldfärg.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Q WORKSHOP together with Chaosium Inc. produly present this unique metal dice set for Call of Cthulhu Roleplaying Game. These dice can also be used with any game where you need to fight the monsters from Outer Sapces. Watch out for the tentacles, they're everywhere...
The set contains 7 polyhedral dice: 1 x D4, 1 x D6, 1 x D8, 1 x D10, 1 x D12, 1 x D20, 1 x D100 percentile. The dice are made of tin, engraved and painted in black.
Our Dead of Winter box insert holds all the cards for Dead of Winter along with player sheets, location cards, tokens, dice and all the standees. There is enough room in the card bays to configure them however you want - you can have a special bay just for Crossroads cards, and one bay for the item cards for each location - it is up to you. Also, with our Dead of Winter inserts, no assembly is required - installation is optional and takes less than 10 minutes.
Our Dead of Winter box insert holds all the components included in either Dead of Winter, OR Dead of Winter: The Long Night - they can even fit the cards and sleeves if you choose to sleeve them. There is room for more than just the base game though; if you choose to, you can combine the two games into one box to bring some of The Long Night's modules over to the base game. We don't recommend cramming everything from both boxes into one insert, but there is ample room to supplement cards, tokens, and survivors from both games in one insert. If you just have to have all the components from both games, however; it may be best to pick up a second insert.
The Dead of Winter inserts also feature "Standee Slots" around the perimeter of the insert. You can use the slots to place standees for quick access to survivors, additional zombies, special infected, or however else you choose.
Finally, similar to our Cosmic Encounter Insert, our Dead of Winter inserts come with adhesive on the bottom; a unique feature to Mini Foam Studio inserts that allows you to fix them to the bottom of your box. This is permanent, but makes the insert more firm and rigid should you prefer, and it will stay in place as you pack and unpack your game components. Alternatively, you can use the adhesive on a piece of cardboard, poster board, or other materials you choose. This will make the insert removable, but adds a little more time to the installation.
But of course, using the adhesive is completely optional; there is a liner covering the adhesive, so you don't have to use it if you don't want to.
https://www.minifoam.com/products/foam-insert-for-dead-of-winter-pre-order-only
50 Card Sleeves that will fit both your One Night and Werewords cards (cardboard tiles) perfectly! Printed on one side to cover any marks you might have accidentally made on them, these card sleeves will protect both your One Night and Werewords cards from any damage! Also designed to make them easy to pick up (the "seam" on the edges" is in the middle of the edge, providing a small area for gripping with your fingers). Compatible with One Night, Daybreak, Vampire, Alien, Bonus Pack 1, Bonus Pack 2, Bonus Pack 3, and Werewords.
https://beziergames.com/collections/one-night-ultimate-werewolf/products/one-night-card-sleeves
Deluxe 2.5mm Corner Cutter Punch (3/32") Radius Heavy Duty Hand Held Rounder with Wide Side Guides
Heavy Duty hand held corner rounding tool with 2.5mm radius. Weighs under 14 ounces & cuts up to approx 5/64" thick (75 mils) paper, PVC cards or laminated paper material.
FEATURES
Has large steel cutting die
Weighs less than 14 ounces
Will punch up to 75 mils thick laminated paper or PVC cards
Has extra wide side guides for registration
https://www.oregonlam.com/C-006-2-5MM_2-5mm_Corner_Cutter_Punch_Rounder.html
Plano 3500
- Antal fack 5-9st
- Mått 230x120x30mm
- Färg klar
Plano 3700 förvaringsask.
Ca 35,5 x 21,5 x 4,7 cm.
Lådan innehåller 4 avlånga fack som sedan kan delas in i mindre fack med de 20 avdelningsväggarna som medföljer. Dessa kan stoppas i något/några av de 42 möjliga avdelningar som finns så att man får mellan 4 och 24 fack att lägga saker i. Om man har fler än de 20 avdelningsväggarna som medföljer skulle man altså kunna få fler fack om man vill.
Each PolyHero Wizard 8 Dice Set comes with 8 dice: D4 Bolt, D6 Fireball, D8 Scroll, 2 D10 Potions, D12 Wand, and 2 D20 Orbs
7 större tärningar med kattmotiv. D6an är 24 mm per sida.
7 större tärningar med kattmotiv. D6an har 24 mm sidor.
7 lite större tärningar med kattmotiv. D6ans sida är 24 mm.
He was the Jedi's starfighter for ground operations. Controlled by two high-ranking clone troopers and Jedi, equipped with two laser cannons, two rocket launchers, and a twin laser gun, the flexible the TX-130 battle tank was one of the most important ground units of the Galactic Republic.
So that your tank can prove its abilities at any time, here is the matching Half-Size foam tray to protect your miniature.
The large compartment is custom-tailored to fit one model of the TX-130 including base. Thanks to the precisely fitting cut, the miniature stays safely in place even during transport. The soft foam protects the weapons, antennas and turret gunner from damage. The colors of the painted miniature are reliably protected from scratches and abrasion as well
In the four small compartments you can store further units like troopers or commanders.
Each of the 4 compartments is 32 mm long x 32 mm wide x 90 mm deep.
The Half-Size foam tray has the dimensions: 275 mm x 172 mm x 100 mm total height (90 mm usable height + 10 mm foam base).
Foam Tray for Star Wars Legion miniatures.
The 40 mm depth of the foam is result from 10 mm foam base and slot foam tray with 30 mm effective depth.
Dimension: 172 mm x 275 mm x 40 mm
16 x slot size 54 mm x 35 mm x 30 mm height
Foam tray for Star Wars Legion dials, token and accessories. The tray fits small and large cards (with or without sleeves), dials (with or without Maneuver Dial Upgrade Kit) and token.
The 45 mm thickness for this foam tray is the result from 10 mm foam base and foam tray with 35 mm effective height.
Dimension of the Feldherr half-size (HS) foam tray: 275 mm x 172 mm x 45 mm height
The foam tray perfect fit in the Feldherr bag: Mini, Mini Plus, Medium, Maxi, Messenger, Hard Case, Backpack and Storage Boxes
1 cut-out for large Legion cards
1 cut-out for small Legion cards
3 cut-outs for Legion dials
5 cut-outs for token, dice and other stuff
Universalpenna som fäster på de flesta ytor som textil, glas, plast, sten, kartong, trä, papper, metall, läder mm. Rund spets. Vattenlöslig. Denna penna är icke-permanent och kan således torkas bort från de flesta blanka ytor, såsom overheadfilm, glas etc.
Medium-spets. Skrivbredd: 1,0 mm.
Keep your cards safe and show them off in style with this brand new playmat featuring Paul from Tekken 8!
Each playmat is packaged in a sturdy box suitable for hanging or shelf displays
High quality 24 x 14 inch neoprene playmat
Smooth surface with rubber backing to keep the mat from slipping
Exclusive designs featuring your favorite Tekken 8 characters from the UniVersus card game!
One of 2 different playmats created for the release of Tekken 8: Clash Decks!!
Ultimate Guard Katana Sleeves Standard Size Yellow (100)
Card Sleeves (Standard Size) Ultimate Guard
Protect your cards like a Samurai with Ultimate Guard's Katana sleeves! Honoring the tradition of great Japanese craftmanship, these precision-made, top-of-the-line sleeves are fully opaque, extremely durable and will meet the highest standards of players and collectors alike!
- 100 sleeves for the protection of standard-sized cards
- Made in Japan
- Extra clear front side
- Fully opaque back side
- For tournament gameplay*
- Extra long lifespan and durability
- Perfect shuffling
- Acid free, no PVC
- Sleeve size: 66 x 91 mm
* Sleeves are subject to tournament judge approval
https://ultimateguard.com/en/deck-n-tray-case/deck-n-tray-100#/11-color_variation-black?search_query=10267&results=1
Self-locking and innovatively designed soft polypropylene deck box with dice tray for the protection and archival safe storage of more than 100 double-sleeved cards in standard size (e.g. Magic: The Gathering™, Pokémon™ and others).*
The mysterious Double Exposure artworks from Duskmourn: House of Horror not only delight in the cards from Magic: The Gathering's new set, but also in our Sidewinder deck boxes!
- Designed for 100 double-sleeved or 120 single-sleeved cards in Ultimate Guard Sleeves
- Resistant Xenoskin material and quality microfiber inner lining
- Strong magnetic closure
- Full colour print
- Officially licensed Magic: The Gathering artwork
- Dimensions: 104 × 88 × 78 mm
Eclipse 2-Piece Boxes are designed with deck organization in mind. The stackable design lets you store decks with confidence. The Eclipse 2-Piece Box stores 100+ double-sleeved cards and is made with acid-free, non-PVC materials for safe storage even when you don't have time to sleeve.
Internal dimensions: 2.62 in. x 2.91 in. x 4.14 in.
Eclipse 2-Piece Boxes are designed with deck organization in mind. The stackable design lets you store decks with confidence. The Eclipse 2-Piece Box stores 100+ double-sleeved cards and is made with acid-free, non-PVC materials for safe storage even when you don't have time to sleeve.
Internal dimensions: 2.62 in. x 2.91 in. x 4.14 in.
Protects cards and photos up to 8" x 10" (203.2mm x 254mm)
Anpassade för mynt, polletter, frimärken & andra små samlarobjekt.
https://www.ultrapro.com/product_info.php?products_id=1310
